<xmp id="484cy">
<menu id="484cy"><nav id="484cy"></nav></menu><dd id="484cy"></dd>
  • <input id="484cy"><tt id="484cy"></tt></input>
    <xmp id="484cy"><nav id="484cy"></nav>
    <nav id="484cy"><code id="484cy"></code></nav>
    <menu id="484cy"><menu id="484cy"></menu></menu>
    產品展示
    查看分類
    熱熔復合機
    熱熔復合機


    活動鞋墊制作流程:

    EVA和布料---熱熔復合----裁斷成方塊----烘箱/熱壓機加熱---冷壓定型機成型---裁斷成形----轉印商標/花紋---成品包裝

     Activities insole production process:

    EVA and fabric melt composite ---- ---Cutting into the box oven / hot press molding heating ------ cutting cold forming machine forming ---- Transfer trademark / product packaging pattern

    適用范圍:

    熱熔薄膜復合機是通過熱輻射對PE、PVC塑料薄膜進行加熱熔化,將EVA片材、輕泡和布匹等進行熱熔貼合處理,把兩種或者兩種以上不同材料相結合并施加一定壓力使其復合成一體的加工機器,多用于服裝皮革、鞋底鞋材、輕泡片材的復合加工,其優點在于用PE、PVC薄膜替代膠水貼合、產品庫存時間長、無變色跡象、不易撕開、貼合效果強于膠水,具有廣泛的適應性和穩定性。

    技術參數:

    門幅:1.8                

    電源電壓:380V 

    最厚貼合材料:50毫米      

    最快貼合速度:600/小時(視材料不同而定) 

    加熱功率:2千瓦×6        

    貼合電機功率:2.2千瓦                 

    熱吹風電機功率:370       

    外形尺寸:3.5米×2.3米×1.9

    配備特點:

    1、  采用直徑180毫米的大滾筒,壓力面積大,不變形,速度快,并有水冷卻裝置,防止材料粘住滾筒。

    2、  左右均可自由調節滾筒的高度,可貼合不同厚度的片材,最厚可達50毫米。

    3、  配有張力裝置,可控制EVA片材的拉力,使片材拉平、不起皺。

    4、  配有不銹鋼擴幅輥,可防止布料和薄膜卷邊皺紋。

    5、  采用變頻無極調速電機控制復合速度,可正反轉控制,送料平穩均勻、提速快、好控制,并有電機故障診斷及保護功能,并且節能。

    6、  配有控溫電路可選擇一組或二組加熱,配合熱風循環系統,加熱均勻,方便準確地控制復合質量。

    7、  配有米表,可計量復合后材料的長度。

    8、  集中電氣控制箱,電氣元件分布合理, 每條線都做有記號,診斷維修簡單快捷,不易出故障,控制系統更為可靠.

    Application:

    Hot melt film laminating machine for thermal radiation through PE, PVC plastic film, heating and melting, the EVA sheet, such as light bulbs and cloth for hot-melt laminating process, the two or more different materials combined and impose certain pressure to compound into one of the processing machines, used for garment leather, shoe soles, light foam sheet of composite processing, the advantage is with the PE, PVC film to replace glue lamination, product inventory for a long time, no signs of discoloration, is not easy ripped, fit effect is stronger than glue, with a wide range of adaptability and stability.

     Technical parameters:

    Width: 1.8 m

    Power supply voltage: 380V

    Fit the thickest material: 50 mm

    Fit the fastest speed: 600 m / hour (depending on different materials may be)

    Heating power: 2 KW × 6 couple

    Fit Power: 2.2 KW

    Hot Hair Power: 370 W

    Dimensions: 3.5 m × 2.3 m × 1.9 m

     Feature:

    1.A large 180 mm diameter cylinder, the pressure area, without distortion, speed, and water cooling device, to prevent the material stick drum.

    2.So are free to adjust the roller height, can fit different thickness of the sheet material, the thickness of up to 50 mm.

    3.With a tension device, can control the EVA sheet tension, so that leveled sheet, does not wrinkle.

    4.With a stainless steel expander roller, fabric and film to prevent curling wrinkles.

    5.Using frequency conversion stepless speed control of complex motor speed, Reversible control, stable and uniform feeding, fast speed, good control, and electrical fault diagnosis and protection function, and energy.

    6.With a temperature control circuit can select a set or two sets of heating with hot air circulation system, heat evenly, easily and accurately control the composite quality.

    7.With meters, can measure the length of the composite material.

    8.Centralized electrical control box, a reasonable distribution of electrical components, mark each line are doing a diagnostic repair quick and easy, not easy to fail, the control system more reliable.

    數據提供:天助網    
    商盟客服

    您好,歡迎蒞臨超駿機械,歡迎咨詢...

    蔡先生: 點擊這里給我發消息
    正在加載

    觸屏版二維碼

    欧美日韩网曝国产-最新国自产拍视频在线播放-日本二区三区欧美亚洲国产-欧洲熟妇精品视频,韩国欧美日产国产AV,亚洲欧美综合国产不卡,国产自偷自偷七区