<xmp id="484cy">
<menu id="484cy"><nav id="484cy"></nav></menu><dd id="484cy"></dd>
  • <input id="484cy"><tt id="484cy"></tt></input>
    <xmp id="484cy"><nav id="484cy"></nav>
    <nav id="484cy"><code id="484cy"></code></nav>
    <menu id="484cy"><menu id="484cy"></menu></menu>
    產品展示
    全自動膠帶切條機
    全自動膠帶切條機


    適用范圍:

    適用于美紋紙、牛皮紙、雙面膠、布基膠帶、泡棉膠帶、膠帶,布基、麥拉、汽車泡綿、光學膜、聚脂膜、保護膜及部分無粘性材料等高精度不同規格的分切。

    技術參數:

    有效門幅:1.35米(另有1.7米、2.05米、2.4米可選) 

    客戶自備5KG空壓氣源

    放料氣脹軸直徑:75 毫米(可訂制不同尺寸)     

    最小切條寬度:1 毫米

    分切直徑:300 毫米(也可定制加大到400毫米)

    切割精度:±0.05 毫米

    放料電機功率:5千瓦變頻調速                 

    刀片電機功率:3千瓦變頻調速                           

    電壓:380V/220V可選                        

    外形尺寸:3.2米×1.55米×1.4

    配備特點:

    1、  主軸及刀片均采用AC馬達搭配變頻器無極調速,加減速穩定快速,使切割達到最佳效果。

    2、  操作面板采用10.4LCD觸控屏,可直接在屏幕上設定各種切卷條件及運轉裝況。

    3、  中央控制系統為PLC可程式控制器,同軸中可設定多種尺寸(最多20種模式)一次性自動轉換切割,做到無人操作自動完成。

    4、  刀座移位使用伺服馬達配合高精度進口滾珠螺桿進行尺寸定位,并使用線性滑軌承載刀座,定位動作精確平順。

    5、  進刀使用伺服馬達配合高精度進口滾珠螺桿控制,可擬人化做三段式速度進刀切卷,提高效率并得到最好品質。

    6、  圓刀自動角度調整:使用伺服馬達計算圓刀角度轉向,因應不同材料做不同角度變化(角度調整范圍±8°) 當切割平面不佳時,可直接變換切割角度,可減少換刀次數,避免了手動調角度的麻煩,大大提高生產效率。

    7、  冷卻系統:切刀采用真空發生噴水裝置,矽溶液冷卻,避免切刀粘膠,確保裁切作業順暢。

    8、  安全防護:切割主軸尾座未合上時,機器無法啟動,工作過程中如尾座異常打開,機器自動停機,確保操作人員安全。

    9、  (可選配)手動調節或自動調節圓刀角度。

    10、(可選配)內置雙馬達自動磨刀機,始終保持刀口鋒利,操作簡便。

    11、 (可選配)安裝了大型安全防護罩,大大提高了機器操作的安全性能。

    Application:

    Apply textured paper, kraft paper, double sided tape, cloth tape, foam tape, adhesive tape, fabric, Mylar, automotive foam, optical film, polyester film, PE, PVC, PET protective film and non-sticky material part and other high-precision cutting of different specifications.

    Technical parameters:

    Valid  width 1.35m (1.7m, 2.05m, 2.4m optional)

    Client need to provide for himself 5KG air compressor

    Axle diameter 75 mmman-made different sizes

    Minimum width of slitting 1 mm

    Diameter of slitting 300 mm(could increase to 400mm

    Cutting accuracy ±0.05 mm

    Motor power 5KW frequency control

    Blade motor power 3 KW frequency control

    Voltage 380V/220V selectable 

    Shapes and sizes 3.2m×1.55m×1.4m

     Feature:

    1、  principal axis and blade both adopt AC motor to match the transducer with electrodeless .

    2、  Operation panel adopt 10.4 inches LCD Touch panel, the customer can set various conditions of and operating condition on screen immediately.

    3、  Central control system adopt PLC controller,in the coaxial the customer may set various sizes( 20 patterns at most) and automatic transfer once which achieve unmanned operation.

    4、  Tool apron transposition ? adopts servo motor to match the high precision entrance ball screw to locate the size and adopts linear sliding rail to bear the tool apron, which makes the Location  accurate and smooth-going.

    5、  Feed adopts servo motor  to match the high precision entrance ball screw to control; thus could rapidly cut and roll in ternary form which increase efficiency and get the best quality.

    6、  Circular knife angular adjustment automatically: adopt servo motor to calculate the angle veer and cope with different material to make different angle change (the Range is ±8) when incise flat unsoundly, the customer could directly change its angel and decrease the times of tool changing which avoid the trouble of change angle through manual operation and enhance productivity.

    7、  Cooling system: cutter adopts vacuum waterworks and silicon liquor cooling to avoid cutter glue something and ensure the crop operation smoothly.

    8、  Safety protection: when the tailstock of incision principal axis isn’t connecting, the machine cannot start, during the working process, if the tailstock unfolds Abnormally, the machine will stop automatically to guarantee the operation Staffs’safety.

    9、  (Selectable) adjust the angle of circular knife in manual or automatic.

    10   (Selectable) internally installed automatic tool sharpener equipped with double motors which maintain the knife edge sharp and easy to handle.

           (Selectable) completed large-scale security hood, to enhance the safety performance.

    數據提供:天助網    
    商盟客服

    您好,歡迎蒞臨超駿機械,歡迎咨詢...

    蔡先生: 點擊這里給我發消息
    正在加載

    觸屏版二維碼

    欧美日韩网曝国产-最新国自产拍视频在线播放-日本二区三区欧美亚洲国产-欧洲熟妇精品视频,韩国欧美日产国产AV,亚洲欧美综合国产不卡,国产自偷自偷七区